|
The Transactions of the Nordic Rheology Society are published annually and contains articles from the Nordic Rheology Conference. Volume 18 presents papers from the combined NRC/AERC 2010.
The latest two years requires member login.
Log in
Log in
Invited Papers
Polymer Melts and Solutions Complex Fluids and Flows
-
Extensional Flow through Hyperbolic Contraction Studied Both Numerically and Experimentally
M. Nyström, H.R.T. Jahromi, M. Stading, and M.F. Webster
-
Creep Measurements Confirm Steady State in Extension of Highly Branched Polymer Melts
N.J. Alvarez, J.M.R. Marin, Q. Huang, and O. Hassager
-
Visualization of Bubble Dynamics in Oil Water Gas Interface: The Effect of Rheology
A.H. Rabenjafimanantsoa and R.W. Time
-
Flow Behavior and Flocculation of MFC Suspension Measured in Rotational Rheometer
A. Sorvari, T. Saarinen, S. Haavisto, J. Salmela, and J. Seppälä
-
Thermal convection in a nonlinear non-Newtonian magnetic fluid
D. Laroze and H. Pleiner
Rheology for Industrial Processes Suspension Rheology
Powder Rheology
-
The Rheology of Powders and Bulk Materials – a Multivariate Approach Using Dynamic, Shear and Bulk Property Measurements
T. Freeman, J. Clayton, and B. Armstrong
-
Application of Ring Shear Testing to Optimize Pharmaceutical Formulation and Process Development of Solid Dosage Forms
S.V. Søgaard, T. Pedersen, M. Allesø, J. Garnæs, and J. Rantanen
-
Shear Testing of Powders for Process Optimization
D. Schulze
-
Strength and Durability of Feed Pellets Influenced by Different Particle Size Distribution, Pellet Volume and Dehydration Techniques
D. Miladinovic, M. Sørensen, and B. Svihus
Rheological Methods and Modelling
-
A New Rheometer Platform for Extended Testing Capabilities (Course material)
J. Läuger
-
An Overview of Measurement Techniques for Determination of Yield Stress
M. Larsson and J. Duffy
-
Use of Strain Gauges to Estimate Pressure in Capillary Rheometers
C. Salas-Bringas, E. Stemsrud, T. Ringstad, O.-I. Lekang, and R.B. Schüller
-
Modeling and Optimization with Viscoelastic Differential Constitutive Models
K.E. Jensen, P. Szabo, M.A. Alves, and F. Okkels
-
Transient Shear Banding of Complex Fluids
A. Puisto, X. Illa, A. Lehtinen, M. Mohtaschemi, and M. Alava
-
Peristaltic Flow of Non-Newtonian Fluids through Curved Channels: a Numerical Study
A. Kalantari, K. Sadeghy, and S. Sadeqi
Rheology of Food and Biopolymers
-
Envisioning Wheat Flour Dough as a Triphasic Medium to Predict Bubbles Stability
A. Turbin-Orger, H. Chiron, L. Chaunier, and G. Della Valle
-
Thermal Influence on Rheological Characteristics of Butter and Margarine during Distribution, Storage and Use
E.-O. Rukke, C. Salas-Bringas, R.K. Abrahamsen, E. Skuterud and R.B. Schüller
-
Colloidal Stability and Rheological Behaviour of Rapeseed Oil in Water Emulsions Stabilized with Whey Protein and Chitosan
A. Sreedhara, G.E. Vegarud, E.-O. Rukke, T.G. Devold, D. Ekeberg, and R.B. Schüller
-
A Method for Measuring Stickiness of Bread Dough
C. Tock, F. Gates, C. Speirs, G. Tucker, P. Robbins, and P. Cox
-
Insights into the Functional Behaviour of Lecithin in Oil-Based Suspensions
G. Arnold, Y. Schneider, J. Friedrichs, F. Babick, and H. Rohm
-
Rheological Properties and Microstructure of Buffalo Yoghurt
H.T.H. Nguyen, L. Ong, C. Lefèvre, S.E. Kentish, and S.L. Gras
-
Addition of Exopolysacharides from S. Thermophilus or Dextran to Milk prior to Acidification: A Comparative Study
S. Mende, M. Peter, K. Bartels, T. Dong, H. Rohm, and D. Jaros
-
Oligomers as Rheological Modulators in Structured Biopolymer Systems
K.I. Draget
-
Rheological Characterisation of Acid Pectin Samples in Absence and Presence of Monovalent Ions
A. Ström and S.M. Goh
Rheology of Pharmaceuticals
-
Development and Rheological Profiling of Biosimilar Mucus
M. Boegh, S.G. Baldursdottir, M.H. Nielsen, A. Müllertz, and H.M. Nielsen
-
Polymer Selection for Simulation of Rheological Properties of Human Gastric Fluid
P.B. Pedersen, P. Vilmann, D. Bar-Shalom, A. Müllertz, and S.G. Baldursdottir
-
Effects of Molecular Weight on Phase Separated Coatings for Controlled Release of Drugs
H. Andersson, M. Stading, J. Hjärtstam, C. von Corswant, and A. Larsson
-
Use of Intrinsic Viscosity for Evaluation of Polymer-Solvent Affinity
D. Marani, J. Hjelm, and M. Wandel
-
Investigation of Pharmaceutical Hot-Melts via Simultaneous Rheometry and Polarization Microscopy
J.P. Plog and F. Soergel
-
Small Peptide-Based Hydrogels: Monitoring Stiffness and Self-Assembly Kinetics by Means of Oscillatory Rheology
M. Berta, W.J. Frith, M. Kirkland, R. Holman, and P. Schuetz
-
Formation of Fouling Layers in Wavy-Walled Channels
A. Roustaei and I. Frigaard
-
Interfacial Rheology of Bacterial Biofilms
P.A. Rühs, L. Böni, G.G. Fuller, R.F. Inglis, and P. Fischer
Posters
-
Viscosities of Pure and Aqueous Solutions of Monoethanolamine (MEA), Diethanolamine (DEA) and N-Methyldiethanolamine (MDEA)
U.S.P.R. Arachchige, N. Aryal, D.A. Eimer, and M.C. Melaaen
-
Rheological Properties of Aqueous Dispersions of Conductive Poly(Benzimidazobenzophenanthroline)
S.-P. Hirvonen, S. Hietala, and H. Tenhu
-
Yield Stress Value Determinations of a Physical Gel
S. Hvidt
-
Production of Cheese Powder without Emulsifying Salt: Effect of Processing Parameters on Rheology and Stability of Cheese Feed
A.B. Hougaard, C. Varming, K.D. Johnsen, B.L. Bentsen, A. Murciano, Y. Ardö, and R. Ipsen
-
Purification and Characterisation of Soluble Rapeseed Protein for Food Application
M. Kristjansson, K.L. Eybye, and M.B. Hansen
-
Improving the Statistical Model for Determination of Wax Appearance Temperature from Rheological Data
R.B. Schüller
-
Renewable Gas Barriers for Paper Coating
M. Stading, E.L. Bragd, and D. Johansson
-
pH Dependent Polymer Surfactants for Hindering BSA Adsorption to Oil-Water Interface
S. Çolak, P. Guzman, N.J. Medlicott, H. Tenhu, J. Niskanen, A. Alhoranta, L. Jørgensen, and S. Baldursdottir
-
The Viscoelastic Properties of the Cervical Mucus Plug
S.K. Bastholm, N. Becher, P.R. Stubbe, I.S. Chronakis, and N. Uldbjerg
-
Biofilm Formation during Hexadecane Degradation and the Effects of Flow Field and Shear Stresses
C. Fjeld, and R.B. Schüller
-
Effect of Mixed Solvents on Polymer Conformation – Correlation between the Hildebrand/Hansen Solubility Parameters and the Intrinsic Viscosity of Polymer Solutions
C.G. Madsen, A. Skov, L. Jørgensen, S. Baldursdottír, and N.J. Medlicott
-
Towards an Accurate Shear Testing Method for Characterizing Pharmaceutical Particulate Systems
T. Pedersen, S. Søgaard, J. Rantanen, and M. Allesø
-
PLGA Conformational Behaviour Dependence of the Network Characterized by Rheological Study
F. Wan, S.G. Baldursdottir, M.J. Maltesen, S. Bjerregaard, C. Foged, J. Rantanen, and M. Yang
Oral presentations
Invited Paper
Rheology for
industrial processes
-
Extending the Visco-Plastic Lubrication Concept to Near Net Shape
Products and Encapsulation
S. Hormozi, G. Dunbrack, and I.A.
Frigaard
-
Viscoelastic Properties of Oil-Based Drilling Fluids
B. Bui, A.
Saasen, J. Maxey, M.E. Ozbayoglu, S.Z. Miska, M. Yu, and N.E. Takach
-
Rheological Modeling of Fracture in Thermoplastic Polymers During
Thermoforming Processes
H. Hosseini, B.V. Berdyshev, and A.
Mehrabani
-
An Experimental Study of Gas Lift Efficiency in Polymer
R.W. Time
and A.H. Rabenjafimanantsoa
-
Displacement of Yield Stress Fluids in Inclined Pipes
K. Alba,
S.M. Taghavi, and I.A. Frigaard
-
Splitting Mechanisms and Dynamics of Taylor Bubbles in Non-Newtonian
Fluids in Annuli with Relevance to Gas-Kicks in Petroleum Wells
R.W. Time and A.H. Rabenjafimanantsoa
Comples Fluids and
Flows
Rheology of food and
emulsions
-
Rheology and Microstructure of Mozzarella Type Curd Made from
Buffalo and Cows’ Milk
I. Hussain, A.E. Bell, and A. S. Grandison
-
What Determines Foaming Ability of a Melt - Rheology or Surface
Tension? M. Stading, G. Franzoni, and D. Johansson
-
Oscillation Measurements and Creep Test of Bread Prepared from
Wheat-Lupin Flours and Wheat Flour-Lupin Fibre Dough’s Blends
A.R. Ahmed, I. Mohammed, and B. Senge
-
Impact of Polysaccharides from Lactic Acid Bacteria on the
Rheological Behaviour of Acid Milk Gels
S. Mende, M. Peter, K.
Bartels, H. Rohm, and D. Jaros
-
Relation between Rheological Properties of Pectin Gels and Pectin
Fine Structure
A. Ström, L. Lundin, E. Morris, and M.A.K.
Williams
-
Entry Flow Alignment of Wormlike Micelles through an Abrupt
Contraction V.L. Bueno, J. Kohlbrecher, and P. Fischer
Rheological methods
and rheometry
-
Rheo-Microscopy: Simultaneous Structural and Rheological Information
J. Läuger and P. Heyer
-
Detection of Viscoelasticity in Aggregating Dilute Protein Solutions
through Dynamic Light Scattering-Based Optical Microrheology
M.
Larsson, C.A. Rega, J. Duffy, and H. Jankevics
-
Monitoring Emulsions Morphology under Shear via Simultaneous
Rheometry and In-situ FT-IR Spectroscopy
J.P. Plog, K. Sugimoto,
and M. Feustel
-
Measurement of Finite Extensibility Parameters for Polymer Solutions
P. Szabo, C. Clasen, and G.H. McKinley
-
Suspension Stability; Why Particle Size, Zeta Potential and Rheology
are Important M. Larsson, A. Hill, and J. Duffy
Modelling/Simulations
and computation
-
Toasting the Jelly Sandwich: Rheological Effects of
Shear Heating on the Earth’s Lithosphere
E.H. Hartz, S. Medvedev, D.W. Schmid, and A. Souche
-
Bénard-Marangoni instability in a linear viscoelastic
magnetic fluid
D. Laroze, J.
Martinez-Mardones, and H. Pleiner
-
Shear Banding and Colloidal Models
M. Mohtaschemi, A. Karppinen, T. Saarinen, A.
Puisto, A. Lehtinen, X. Illa, and M. Alava
Posters
-
Development of a Reproducible Powder Characterization Method Using a
Powder Rheometer
S.V. Søgaard, M. Allesø, J. Garnaes, S.
Baldursdottír, and J. Rantanen
-
Influence of Surface Lipids in Commercial Zein on Microstructure and
Rheological Properties of Gluten-Free Dough
D. Johansson, A.
Krona, and M. Stading
-
Strength of Wheat Gluten Pellets Made at Different Temperatures,
Moisture Contents and Compacting Stresses
C. Salas-Bringas, D.
Miladinovic, T. Isaksson, O.-I. Lekang, and R.B. Schüller
-
Rheology in Solid Biofuel Production
C. Salas-Bringas, O.-I.
Lekang, and R.B. Schüller
-
Development of Iso-Viscous, Iso-Sweet Emulsions for the
Determination of Sensory Difference Thresholds
K. Hoppert, A.
Puschmann, S. Zahn, and H. Rohm
-
Rheological Characterization of Milk during Digestion with Human
Gastric and Duodenal Enzymes
H. Devle, C.F. Naess-Andresen, E.-O.
Rukke, G.E. Vegarud, D. Ekeberg, and R.B. Schüller
-
Rheological Characterization of Omega-3 Enriched Skimmed Milk during
Production and Storage
E.-O. Rukke, L. Saga, E. Skuterud, and
R.B. Schüller
-
The Effect of Rheology on Extrusion Process F. Aghazadeh
-
Rheological Characterization of Chemically Modified Hemicellulose
A.-H. Vesterinen and J. Seppälä
-
Rheology of Thermoplastic Cellulose-Esters I. Krasnou,
E.
Tarasova, and A. Krumme
-
Stabilization of Oil-In-Water Emulsions by Enzyme Catalyzed
Oxidative Gelation of Sugar Beet Pectin
D. N. A. Zaidel, I. S.
Chronakis, and A. S. Meyer
-
The Effect of Drying Methods on Functionality Properties and Odour
Profile of Purified Fenugreek Gum Extracted with a Novel Extraction
Method M. Kristjansson, K.L. Eybye, and E.G. Mhlanga
-
Experimental Study of Rheological Properties of Model Drilling
Fluids
A. Taghipour, B. Lund, I. Sandvold, N. Opedal, I. Carlsen,
T. Vrålstad, J. D. Ytrehus, P. Skalle, and A. Saasen
-
Rheological Characterisation of Hydroxypropylated Modified
Nanocrystalline Cellulose Suspensions
A. Johnson, C. Olsson, G.
Westman, A. Ström, and A. Larsson
-
Surveying of Rheological Properties of Salvia Macrosiphon’s Seed Gum
and Effect of Ca+2 Salts
M. Hojjatoleslamy, E. Nikoofar, and R.
Farzan
-
The Effect of Frying on the Chemical and Rheological Properties of
Frying Oil and Physical Properties of Produced Potato Chips
M.
Hojjatoleslamy and L. Sedaghat
Oral presentations
Invited Paper
Food and bio-rheology
Rheological methods
and rheometry
Comples Fluids and
Flows
Polymer melts and
solutions
-
Determination of dispersion state of carbon nanotubes/epoxy
suspensions prepared by different mixing techniques
S.C. Schulz,
G. Faiella, S.T Buschhorn, K Schulte, M. Giordano and W. Bauhofer
-
Micro-injection moulding on lab-on-a.chip(LOC)
H J. Oh, J H Park,
Y S. Song and J. R. Youn
-
Dynamic shear rheology of PC/MWCNT composites made from PC with
different molecular weights
K. Prakashan, S C. Mun, M. Kim, H J.
Jung, Y. Son and O Ok Park
-
Investigation of HPMC behavior in a buffer solution using rheology
and UV imaging
S. Baldursdóttir, J. Pajander, J Rantanen and J.
Østergaard
-
Injection Moulding machine with height-adjustable slit die for
rheological measurements of polymer melts during processing
conditions J. Aho, L. Moberg, S. Syrjälä and P. Järvelä
-
Rheological Characterization of carbpol 940 in steady shear and
start-up flow fields J. S. Lee and K. W. Song
-
Development and characterization of extruded biodegradable foams
based on zein and pearl millet flour
K. Filli, M. Sjöqvist, C.
Öhgren, M. Stading and M. Rigdahl
-
Rheological properties of poloxamer 407 solutions and gels
E. K.
Park and K.W. Song
-
A method to correlate floc size to rheological characteristics of
microfibrillated cellulose water suspensions
T. Saarinen, A.
Karppinen, E. Saarikoski, J. Salmela, M. Nuopponen, A, Laukkanen and
J. Seppälä
-
Gelation behaviors of cellulose/PE-co-AA alkaline solutions
E.
Saarikoski, S Lipponen and J. Seppälä
-
Understanding viscoelastic material behavior in car body engineering
and manufacturing M. Schmidt and G. Strannhage
-
Influence of tacticiy on the rheology of syndiotactic polypropylene
N.Ahmad, N. Grizzutti and I. Di Rienzo
-
Constant force extension in polymer solutions
P. Szabo, S. Clasen
and G. H. McKinley
Modelling/Simulation
and Computational
-
Residual stress and viscoelastic deformation of film insert molded
parts and numerical simulation for film insert moulding
S. Y.
Kim, and H. J. Oh, S. H. Kim and J. R. Youn
-
GLS approximations for quasi-Newtonian fluid flows
F. Zinani and
S. Frey
-
Simulation of extensional flow through contractions towards a
measuring system for extensional viscosity
M. Nyström,
H.R.Tamaddon Jahromi, M. Stading and M.F. Webster
-
Combined methods in rheology: Rheo-SAXS, rheo-NMR and
rheo-dielectric to bridge length and time scales
T. Meins, K.
Hyun, K-F. Ratzsch, C. Friedrich, B. Struth and M. Wilhelm
-
Rheological characterization of oil saturated powder blends based on
experimental design and multivariate analysis
L. C. Saga U. B.
Selmer, K. Hovde Liland, T. Isaksson and R. B. Schüller
-
Mathematical description of non-Newtonian flow of polymeric melts in
thermoforming process H. Hosseini and B. V. Berdyshev
-
Role of rheology on quality of polymeric articles
F. Aghazadeh,
H. Hosseini and F. Seyyednajafi
-
Cavitation bubble regimes in polymers and viscous fluids
R.W.
Time and A. Rabenjafimanantsoa
Posters
-
A new non-linear parameter for
polymer melts, using FT-rheology
K. Hyun, M. Kempf, D. Ahirwal,,
V. Rolón-Garrido., M. H. Wagner and M. Wilhelm
-
Addition of Purified exopolysaccharides from lactic acid bacteria
affects the rheological behavior of acid milk gels
S. Mende, S.
Thomas, C. Mentner, D. Jaros and H. Rohm
-
The influence of the PVC ratio of various dispersing agents on the
rheological properties of spectrally selective paint coatings for
solar thermal applications
L. Slemenik Perse, M . Mihelicic and
B. Orel
-
Rheological properties of cross-liked hyaluronic acid for dermal
fillers M. Mellergaard, M. Larsen and B.M. Malle
-
Transient rheology of a magnetorheological fluid under shearing
I
Jönkkäri and S. Syrjälä
-
A rheological study of a textile coating paste containing PEDOT:PSS
M Åkerfeldt and M. Strååt
-
Modification of lipophilic suspensions rheology by lecithins and
lecithin fractions
G. Arnold,Y. Schneider, S. Ortega, S. Eglin
and H. Rohm
-
Enzymatic modification of adsorbed ß-lactoglobulin layers at
air/water interface: characterization by interfacial rheology
D-
Ercili-Cura, M. Lille, R. Lantto, J. Buchert, A. R. Mackie and R.
Partanen
-
Enzymatic crosslinking at oil-water interfaces – a rheological study
R. Partanen, M. Lille and P. Forssell
-
Comparison between diametral and uniaxial compression tests of
pelleted feed C. Salas-Bringas, N Misljenovic, O-I. Lekang and R.B.
Schüller
-
Influence on particle size on strength of pelleted feed
C.
Salas-Bringas, N Misljenovic,T. Wicklund O-I. Lekang and R.B.
Schüller
-
Solubility and solution rheology of enzymatically treated pulp
M.
Rissanen, S. Syrjälä, M. Vehviläinen and P. Nousiainen
-
Rheometric study of apparent wall slip in microdispersions
M.
Vecer,V. Penkavova and O. Wein
-
Extensional rheology of cellulose – ionic liquid solutions
M.
Hummel, A. Michud and H. Sixta
-
Effect of pH and calcium sat on rheological properties of xanthan
gum-carboxymethyl cellulose blends
S. Hemmatzadeh, M.
Hojjatoleslamy and O. Eivazzadeh
-
Time-dependant rheology of
concentrated xanthan gum solutions J-S. Lee and K-W. Song
-
Fundamental rheological investigation on snail secretion filtrate in
well-defined shear flow fields H-J. Ahn and K-W. Song
-
Study of viscosity of cellulose ionic liquid solutions at high
concentrations
P. Järvi, M. Granström, A.W:T: King, S. Hietala,
A.M. Olszewska, I Kilpeläinen and D.S. Argyropoulos
-
Rheological and electrical properties of PS/multi-walled carbon
nanotube nanocomposites prepared by latex technology
M-H. Kang,
W.J. Noh and S. J. Lee
-
The effects of storage temperature on the rheological properties of
poly(1-oxotrimethylene) spinning dope in an aqueous solution of
complex metal salts J. Kim and BC.Kim
-
Viscoelastic behavior of PVC plastisol with cyclodextrin derivative
and anti-migration of plasticizers in flexible PVC
B. Y. Yu and
S-Y. Kwak
Oral presentations
Poster presentations
-
Reversed extensional flow on polyisoprene melts
A.G. Bejenariu,
H.K. Rasmussen, D. Auhl, A.L. Skov and O. Hassager
-
I
rreversibility
and Dissipation: Afterthoughts to Technical Fibre Flow
U.
Björkman
-
Rheology as a tool to fine tune the characteristics of polymer
vinyl-acetate / vinyl-versatate dispersions and their behavior in
cement mixes F. Curto, S. Carrà and T. Cerulli
-
Determination of the glass transition temperature of powder samples
using Dynamic Mechanic Analysis on compacts
M. Larsson, A.
Larsson, and M. Stading
-
Controlled Foaming of Cereal Protein Foams
A. Lipia, D. Johansson
and M. Stading
-
Flow Properties of Processed Liquid Egg White Products
C. Németh,
I. Zeke, R. Juhász, L. Friedrich, J. Bata, C. Balla
-
Assessment of a new laboratory die pelleting rig attached to a
texture analyzer to predict process-ability of wood pellets. Energy
consumption and pellet strength
C. Salas-Bringas, T. Filbakk, G.
Skjevrak, O.I. Lekang, O. Høibø and R.B. Schüller
-
Compression rheology and physical quality of wood pellets
pre-handled with four different conditions
C. Salas-Bringas, T.
Filbakk, G. Skjevrak, O.I. Lekang, O. Høibø and R.B. Schüller
-
Data
analysis from capillary rheometry can be enhanced by a method that
is an alternative to the Rabinowitsch correction
C. Salas-Bringas, O.I. Lekang and R.B. Schüller
-
Rheological properties of buttermilk pellets manufactured by a new
die pelleting rig of a texture analyzer
C. Salas-Bringas, E.O.
Rukke, L. Saga, O.I. Lekang and R.B. Schüller
-
Dielectric Properties of Polyethylene Foams at Medium and High
Frequencies M. Strååt, I. Chmutin and A. Boldizar
-
Flow Properties of Common Norwegian Dairy Products
I.C. Zeke, R.
Juhász, R.B. Schüller and E.O. Rukke
-
Rheological Properties of a Selection of Common Norwegian Food
Products I.C. Zeke, R. Juhász, R.B. Schüller and E.O. Rukke
Invited Papers
Measurement techniques and rheology
-
Combined Rheological Methods: From Rheo-Optics to
Magneto-Rheology and Beyond
J. Läuger
-
Planar Elongation Measurements on Soft Elastomers
M.K. Jensen, A.L. Skov, H.K. Rasmussen,
A.
Bach, and O. Hassage
r
-
A Band Rheometer for Fibre Flow Studies
U. Björkman
-
Optimization of the Synthesis Parameters for
Obtaining PDMS Samples Suitable for Filament Stretch Rheometer
Measurements
A.G. Bejenariu, I.
Javakhishvili, M.K. Jensen, A.L. Skov, and O. Hassager
-
Development of a New Capillary Rheometer that uses
Direct Pressure Measurements in the Capillary
C. Salas-Bringas, O.-I. Lekang, E.O. Rukke, and R.B. Schüller
-
On End-Effect Correction for Couette Type Viscometers for Newtonian
and Non-Newtonian Fluids
R.W. Time, H.A. Rabenjafimanantsoa, V.C.
Kelessidis, and R. Maglione
-
Measuring the Rheological Properties of Ultrathin
Films at the Water-Air and Water-Oil Interface by Using a Novel
Double Wall Ring (DWR) Geometry
A. Franck
and P. Hodder
-
Relating the Molecular Structure of Comb-Type
Superplastizicers to the Compression Rheology of MgO Suspensions
L. Bergström, A.M. Kjeldsen, and R.J. Flatt
Suspension rheology
-
Rheological Measurements of Cementitious Suspensions
Using a Grooved Measuring Device
H. Hodne,
A. Saasen, and J. Haugland
-
Study of Meta Kaolin Influence on Rheological Properties of Cement
Mortars R. Hela and J. Maršálová
-
Characterization of Polymer Networks by Swelling
S.M. Frankær, M.K. Jensen, A.G. Bejenariu,
A.L. Skov, and O. Hassager
-
Rheological Properties of Water-Soluble Methacrylate
Block-Copolymers
A.-H. Vesterinen, J. Rich,
and J. Seppälä
-
Methods to Analyze Problems in Coating Flows by
Non-Newtonian Fluid Dynamics
J.-P.
Huhtanen, T. Karvinen, and R. Karvinen
-
Rheology and Structures of EO-PO-EO Block Copolymers
in Aqueous Solutions
S. Hvidt and K.
Keiding
-
Rheological Behaviour of Poly(N-isopropyl acrylamide)
in Water-Acetone Mixtures
T. Munk, S.
Hietala, K. Kalliomäki, M. Nuopponen, H. Tenhu, F. Tian, J.
Rantanen, and S. Baldursdóttir
-
Viscosity of Suspensions. Finite Size Effects and
Polydispersity.
P. Szabo and R. Hansen
-
Technical Aspects on Rheological Characterization of
Microfibrillar Cellulose Water Suspensions
T. Saarinen, M. Lille, and J. Seppälä
Food and polymer
rheology
-
Viscoelastic Properties of Saliva from Different
Glands
M. Stading, D. Johansson, C.
Diogo-Löfgren, and C. Christersson
-
Comparison of Texture Analysis of Fatty Liver from
Duck and Goose Using an Oscillatory Plate-Plate Rheometer and a
Texture Profile Analyser
E.O. Rukke, O.
Lothe, and R.B. Schüller
-
The Effect of Buttermilk and Micro-Particulated Whey
Proteins on the Rheological Properties of a Dairy Custard Model
System
J. Nordli, R.B. Schüller, A.-G.
Johansen, J.A. Narvhus, T. Almøy, and R.K. Abrahamsen
-
Process Rheology Predictions in a Confectionary Extrusion Process
M.G. Christensen and A. Friis
-
Rheological Properties of Melt-Compounded
Nanocomposites of Atomic-Layer-Deposition-Coated Polyamide and
Polystyrene Powders
K. Nevalainen, R.
Suihkonen, T. McNally, E. Harkin-Jones, S. Syrjälä, J. Vuorinen, P.
Järvelä, and N. Isomäki
-
Characterization of Flow-Induced Surface Defects in
Injection Moulded Components – Case Studies G. Iannuzzi,
A. Boldizar, and M. Rigdahl
-
Extensional Viscosity in Uniaxial Extension and
Contraction Flow – Comparison of Experimental Methods and
Application of the Molecular Stress Function Model
J. Aho, V.H. Rolón-Garrido, S. Syrjälä, and M.H.
Wagner
Application of
rheology
-
Determination and Assessment of the Rheological
Properties of Pastes for Screen Printing Ceramics
J.W. Phair and A. F-J. Kaiser
-
Influence of Rubber Pre-Processing on the Rheological
Behavior of SBS/Crumb Rubber-Modified Bitumen
M. Navarro Gonzalez and M.H. Wagner
-
A New Statistical Method for Determination of Wax Appearance
Temperature
R.B. Schüller, M. Tande, T. Almøy, S. Sæbø, R.
Hoffmann, H. Kallevik, and L. Amundsen
-
PIV Visualization of Acoustic Streaming in
Non-Newtonian Fluid
H.A.
Rabenjafimanantsoa, B.M. Wrobel, and R.W. Time
-
Study of Flow and Blockage of Highly Concentrated
Granular Suspensions Under Squeeze Test Conditions
A. Kaci, G. Racineux, and M. Chaouche
-
A Magneto-rheological Suspension for a Prosthetic
Knee Joint
F. Jonsdóttir, K.H. Gudmundsson,
F. Thorsteinsson, and O. Gutfleisch
Posters
-
A Flexible Platform for Tribological Measurements on
a Rheometer
P. Heyer and J. Läuger
-
Rheological Properties of Fresh Building Materials
M. Haist, H.S. Müller, C. Küchenmeister,
and J.P. Plog
-
The Effect of Limestone Filler on the Properties of
Self Compacting Concrete
S. Grzeszczyk and
P. Podkowa
-
Rheological Characterization of Liver Paste with a New Capillary
Rheometer Based on Direct Pressure Measurements in the Capillary
E.O. Rukke, C. Salas-Bringas, O.I. Lekang, and R.B. Schüller
-
Rheological Characterisation of Plant Food
Dispersions
P.L. Sanchez, S. Schumm, M.
Langton, and L. Bialek
-
Effect of Transglutaminase-Induced Crosslinking of
Sodium Caseinate on Gel Formation Kinetics and Solubility Upon
Acidification to Low pH
M. Lille, R.
Partanen, J. Buchert, and K. Poutanen
-
Melt Rheology Affect Zein Foam Properties
T. Gillgren, T. Alvén, and M. Stading
-
The Effect of Ammonium Polyphosphate and Nanoclay on
the Rheological, Thermal, and Flame Retardant Properties of Epoxy
R. Suihkonen, K. Nevalainen, and J.
Vuorinen
-
A Comparative Study on the Influence of the Platinum
Catalyst in Poly(dimethylsiloxane) Based Networks Synthesis
A.G. Bejenariu, J.Ő. Poulsen, A.L. Skov, and L.
Henriksen
-
Determination of Velocities Profiles in Hyperbolic
Contraction Using Ultrasound Velocity Profiling
D. Zatti, J. Wiklund, G. Vignali, and M. Stading
Invited Papers
General Food Rheology
Rheology and Sensory Perception
Rheology of Food Hydrocolloids
Rheology of Dairy
Products
Rheology of Particles and
Suspensions
Rheology and Health
Posters
-
Rheological properties and phase change behaviors of coconut fats
and oils T. Tipvarakarnkoon, R. Blochwitz, and B. Senge
-
Rheological
behavior of pineapple puree mixed with different types of
stabilizers (gum) T. Uan-On and B. Senge
-
Relative influence of α-lactalbumin and β-lactoglobulin on the
viscosity of whey protein solutions
J.G. Andersen, R. Ipsen, and
A.O. Karlsson
-
Cereal (1→3, 1→4)-β-D-glucans – functional properties and molecular
interactions M.S. Nielsen, A.O. Karlsson, and S.B. Engelsen
-
Gel structure protects cereal -glugan from radical induced
degradation in aqueous systems
R. Kivelä, L. Nyström, and T.
Sontag-Strohm
-
Effect
of viscosity on C sugar in beet sugar factories
M.
Hojjatoleslamy, R. Shokrani, and A. Karbasi
-
Gelation profiling of cold setting pectin in confectionery systems
activated by controlled acidification
N.W.G. Young, O.T. Madsen,
H.A. Jensen, and F.Møller
-
Material properties of zein, kafirin and avenin films
T. Gillgren
and M. Stading
-
T
he
effect of the crosslinking enzyme tyrosinase on gel formation and
texture of acid-induced milk gels
D. Ercili-Cura, M. Lille, J.
Buchert, and R. Lantto
-
Coagulation ability of cheese milk determined by a ReoRox4
instrument
P.D. Frederiksen, M. Hammershøj, P.N. Andersen, M.
Bakman, and L.B. Larsen
-
I
nfusion
pasteurization of whole milk and skim milk: Influence on viscosity
and particle size A.B. Hougaard and R. Ipsen
-
Rheological properties of cold and hot filled model cream cheese
X. Geng, R. Ipsen, and F. Liot
-
Rheology and Functionality of Cheese Powders
I. Celigueta Torres,
R. Ipsen, and T.K. Beck
-
Characterization
of linear viscoelastic behavior of foods and biomaterials at high
frequencies with mechanical impedance measurements B. Mert
-
Rheology in feed production
C. Salas-Bringas, O.-I. Lekang, and
R.B. Schüller
-
Controlling solid state properties of pharmaceuticals with polymer
selection S. Baldursdottir, F. Tian, and J. Rantanen
-
Thixotropy in
water-based drilling fluids A. Tehrani
-
Thermoassociating water-soluble polymers based on tacticity control
S. Hietala, K. Kalliomäki, M. Nuopponen, and H. Tenhu
-
Rheological study of microfibrillar cellulose and dynamic mechanical
analysis of paper sheet A.-H. Vesterinen and J. Seppälä
-
Modelling rheological cone-plate test conditions
R.B. Schüller
and C. Salas-Bringas
-
Ultrasound
based In-Line Rheometry (UVP-PD) of Fat Blends J. Wiklund
An introduction to emulsions and
suspension from different perspectives
Materials with high Deborah numbers
Polymers and nutrition applications
Instrumentation
Fundamental research and
industrial applications
Posters
-
Influence of the kind of cryoprotectant on the viscoelastic
properties of squid surimi L. Campo and C. A. Tovar
-
Rheological studies of hyaluronan/modified hyaluronan mixtures and
the structure of hyaluronic solutions M. Chytil and M. Pekař
-
Shale shaker's effect on drilling fluids rheological properties
A.-R. Fard, T. H. Omland and A. Saasen
-
Rheological study on the aging process in a polymeric fumed silica
suspension
F. J. Galindo Rosales, F. J. Rubio Hernández and J. F.
Velázquez Navarro
-
Correlation between rheological parameters and some colloidal
properties of anatase dispersions
A. I. Gómez Merino, F. J. Rubio
Hernández, J. F. Velázquez Navarro, F. J. Galindo Rosales and P.
Fortes Quesada
-
Microflanking structures & their rheological significance
S.
Mukherjee and H. A. Koyi
-
Pull-apart micro-structures and associated passive folds S.
Mukherjee and R. Chakraborty
-
Influence of different anionic polyelectrolyte dispersants on the
rheological and electrokinetic properties of carbon nanotubes
H.
Sarraf, L. Škarpová and P. Louda
-
Electrokinetic sonic amplitude (ESA) technique as a new tool to
characterize zeta- potential of carbon fibers treated by plasma
oxidation H. Sarraf, L. Škarpová and P. Louda
-
Finite element modelling of the fluid temperature in a plate–plate
rotational rheometer in oscillatory tests
R. B. Schüller, R. Orr
and C. Salas-Bringas
-
Rheological properties of a barium sulphate contrast medium
M.
Stading, S. Edrud, S. Ekman, K. Wendin, M. Bülow and O. Ekberg
-
Explorative Study of NMR Drilling Fluids Measurement
R. Rismanto
and C. v.d. Zwaag
-
Detection Techniques Determining Weighting Material Sag in Drilling
Fluid and Relationship to Rheology
T. H. Omland, A. Saasen and P.
A. Amundsen
Invited papers
Rheology of Fibre Suspensions
-
Fibre flow research history: Part I.
Background and beginning, U. Björkman
-
Characterization of non-Newtonian
fluid models for wood fiber suspensions in laminar and turbulent
flows, J. -P. T. Huhtanen and R. J. Karvinen
-
On fibre flocculation in turbulent
pulp flow, M.S. Nigam
-
The metarheology of crowded fibre
suspensions, U. Björkman
-
Visualization of the flow of a
papermaking suspension in an axisymmetric sudden expansion using
emission tomography,
S. Heath, K. Buckley, M. Martinez, S.
Lapi, J. Olson and T. Ruth
-
The wall effect on the orientation
of fibres in a shear flow,
A. Carlsson, F. Lundell and D.
Söderberg
-
Out-of-plane rheological behaviour
of paper: the effect of furnish composition, basis weight and
drying shrinkage, T. Ponkkala, V. Kunnari and E. Retulainen
Rheology of Suspensions
General Rheology
-
Extensional rheology of cereal
protein systems,
M. Stading, A. Oom, A. Pettersson and S.
Edrud
-
Rheological challenges in automotive
production, M. Schmidt and G. Strannhage
-
Determination of the entrance
pressure drop in capillary rheometry using Bagley correction and
zero-length capillary, J. Aho and S. Syrjälä
-
Simultaneous use of PIV and UVP to
measure velocity profiles and turbulence in jet flow.
A. H.
Rabenjafimanantsoa, R. W. Time and A. Saasen
-
Characterization and rheological
properties of waxy oils, S. C
hen,
G. Øye and J. Sjöblom
-
High pressure hydrate detection in a
stirred vessel,
R.B. Schüller, J. Funner, V. Mathiesen, I.
Gjermundsen and H.K. Kvandal
-
Back extrusion of Vočadlo (Robertson-Stiff)
fluids - semi-analytical solution
P. Filip, J. David and R.
Pivokonsky
-
Rubber technology: Past, present, future
M.Bellander, L. Kari, S. Persson and B. Stenberg
-
An Approach to assess the rheological
behavior relevant to the intumescence process of
polyolefin-chalck-silicone elastomer formulations.
R. Krämer and
U. W. Gedde
-
Quantifying tailing in liquid
confectonery fillings using texture analysis and etensional
viscosity N. W. G Young
Instruments
and methods
Posters
Invited papers
Polymer Rheology
Suspension Rheology
-
Viscosity of cement slurries as a
function of solids content H. Justnes and H. Vikan
-
Rheological hydrate detection and
characterization R.B. Schüller, M. Tande and H.K. Kvandal
-
A method to characterise the
propensity for dynamic sagging of weight materials in drilling
fluids B. Aas, A. Merlo, R. Rommetveit and N. Sterri
-
Flow regimes over particles bed:
Experimental studies for particles transport in horizontal and
inclined annuli H.A Rabenjafimanantsoa, R.W. Time and A. Saasen
Erratum
-
The influence of particle type and
size distribution on viscosity in a non-Newtonian drilling fluid
T.H. Omland, B. Dahl, A. Saasen, K. Svanes and P.A. Amundsen
-
Rheology characterization of polymer
drilling roams using a novel apparatus
Z. Chen, R.M. Ahmed, S.Z.
Miska, N.E. Takach, M. Yu, M.B. Pickell and A. Saasen
-
Drilling fluid tixotropy and
relevance R. Jachnik
-
Adsorption of plasticizers -
Influence of plasticizer and cement type
Vikan, H. Justnes and R.
Figi
General and Theoretical Rheology
Nanocomposites (2)
Industrial Applications of Rheology
Instrumentation
Posters
-
Rheology of non-colloidal
liquid-particle suspensions J. Hyväluoma, T. Kemppinen, P.
Raiskinmäki, A Koponen, M. Kataja, J. Timonen, M.Toivakka
-
The influence of shear thinning
behavior on lubricating grease consistency and its effect on oil
separation K. Siik, J. Vuorinen
-
Rheological characterization of
fiber suspensions prepared from vegetable pump and dried fibers. A
comparative study E.Bayod, U. Bolmstedt, F. Innings, E. Tornberg
-
Rheological properties of cooked oat
bran F. K. Gates, H. Anttila, T. Sontag-Strohm and H. Salovaara
-
Permeable plate rheometry for
evaluation of reaction kinetics of gels S. Edrud and M. Stading
-
Characteristics of out-of-plane
rheological behaviour of paper
T. Ponkkala, V. Kunnari and E.
Retulainen,
-
Reological properties of gels formed
with furcellaran and globular proteins bovine serum albumin and beta
-lactoglobulin
K. Laos, G. J. Brownsey, M. Friedenthal and S. G.
Ring
-
Rheology of strongly sedimenting
magnetite suspensions
J. Gustafsson, M. Toivakka, and K. K.
Koskinen
-
Pressure-dependent viscosity of PIM
compounds T. Sedlacek, B. Hausnerova, P. Saha
-
The Influence of thickeners on the
surface structure of coatings, a relationship between surface
structure, colloidal stability and viscosity
A. Wallström and L.
Järnström
-
Physical properties as a tool for
quality assessment in fruit processing
T. Lõugas, M. Liis, K.
Laos and R. Vokk
-
Relationships between surface
chemistry and rheology in highly concentrated suspensions of
nano-ceramic composites H. Sarraf, J. Havrda, and R. Herbig
-
In situ tensile deformation of
plasticized zein films M. Naushad Emmambux and M. Stading
Invited papers
Cement-Based Suspensions
Drilling Fluids and Cement Grouts
-
Experimental analysis of yield stress in high
solids concentration sand slurries used in temporary well abandonement
operations R. Godøy, A. Svindland, A. Saasen & O. Wallevik
-
On the rheological parameters governing oil well
cement slurry stability
R. Gandelman, C. Miranda, K. Teixeira, A.L
Martins, A.L Waldmann
-
Liquid displacment during oil well cementing operations
E.S.S Dutra, M.F.
Nacache, P.R.S. Mendes, C.R. de Miranda, A.L. Martins & G. Campos
-
Oil based drilling fluids with tailor-made rheological properties: results from a multivariate analysis
E.
Dingsøyr, E. Pedersen & K. Taugbøl
-
Rheological modelling of cementitious materials
H. Hodne & A. Saasen
-
Weighting material sag
T. H. Omland, J. Øvsthus, K. Svanes,
A. Saasen, H. J. Jacob, T Sveen, H.Hodne & P.A. Amundsen
-
Geothermal well cementing: the effect of temperature and time on workability
loss H.G. Svavarsson and O.H. Wallevik
Instrumentation
Food rheology
General and Theoretical Rheology
Industrial Applications of Rheology
Posters
-
The relation between
viscoelastic
properties of suspensions based on paper coating minerals and structures of
the corresponding coating layers".A. Wallström and L. Järnström
-
Rheological
behaviour of skim milk concentrates at different pH.
A. O. Karlsson, R.
Ipsen, Y. Ardö & K. B. Qvist
-
Rheological
properties of bentonite suspensions modified with polymers
A. Heinz, R.
H. Stengele & M. Plötze
-
Characterization
of electrokinetic properties of highly concentrated ceramic suspensions by
electrokinetic sonic amplitude (ESA) measurment
H. Sarraf, J. Havrda & R.
Herbig
-
Extensional
viscosity of paper coating suspensions studied by converging channel flow
and filament stretching J. Jäder, G. Engström & L. Järnström
-
3-D
deformation of Newtonian droplets under simple shear in
vestigated by
experiment, numerical simulation and modeling
D. Megias-Alguacil, M.
Dressler, P. Fischer, K. Feigl & E. J. Windhab
-
Transient non-monotonic flow of
surfactant solutions in strain- and stress-driven flow
V. Herle, P.
Fischer, & E.J. Windhab
-
Modelling texture in low-fat
yoghurt - relevance of shear and elongational flows
T. Janhøj, M. B.
Frøst, C. B. Petersen & R. Ipsen
-
A method of determining
processing behaviour of plastic bounded propellants and explosives
C.
Eldsäter, N. H. Yen, M. Wanhatalo & N. Wingborg
-
Tannic acid modifies the
material properties of Sorghum Kafirin film
M. N. Emmambux, M. Stading &
J. R.N. Taylor
-
Morphology and rheological
behavior of polypropylene / ATH / organoclay blends
N. Ristolainen, T.
Saarinen & J. Seppälä
Invited Papers
Session 1
Session 2
Session 3
Session 4
Posters
Invited papers
Polymer and Suspension
Polymer Processing and
Rheology
Biopolymers and Fibre
Suspensions
Instrumentation and
Techniques
Food Rheology
Posters
-
Rheological
and sensory properties of starch ingredients evaluated in a food
product model T. Ahmt, O.
Bandsholm, J. Thomsen and P.
Poulsen
-
Flow
processing and gel formation – a promising combination for the
design of the shape of gelatin drops
B. Walther, P. Walkenström,
A.-M. Hermansson, P. Fischer, and E.J. Windhab
-
Rate of
Volume Relaxation in a-PMMA and a-PMMA/PEO
Blends P. Slobodian
and P. Sáha
-
Rheology of
Crispy Textures S. Edrud, M. Stading, and M. Langton
-
Rheological
properties of metallocene catalyzed polypropylene copolymers
T.
Saarinen, Santeri Paavola, and Barbro Löfgren
-
Index of
Contributors
Invited papers
Mixed
systems
Food
Rheology
Suspensions and emulsions
Polymer rheology
Instrumentation
Posters
|
2000 - Vol. 8 Papers from NRC in Helsinki
|
Invited Papers
Process Rheology and Measurements
-
Orientation of Self-Organized Supramolecular Polymeric
Nanostractures by
Oscillatory
Shear Flow
R. Mä
kinen,
W. O. Odorico, K. de Moel,
J.
Ruokolainen, M. Stamm,
G. Brinke and O. Ikkala
Food
Rheology
General and Theoretical Rheology
-
The
elusive rubber plateau - A Phenomenological model
J. C. Dyre
-
Meltflow instabilities in processing of polyolefins; causes and cures
S. S. Eggen
-
Melt
rheological behaviour of S-PVC formulations in extrusion dies
T. Glomsaker, E.L. Hinrichsen and P.
Thorsteinsen
Polymer
Rheology
-
Inflation and Instability of a polymeric membrane 1
Neergaard and O. Hassager
-
On
Viscoelastic instability in polymeric filaments
H K.
Rasmussen and O. Hassager
-
Capillary thinning of polymeric filaments
P. Szabo and M. I. Kolte
Posters
Invited Papers
-
The crucial rheological characteristics of gelatine capsules -
search for a replacement
B.
Brockway
-
Physical aspects of polysaccharide protein gelation
A Clark
-
Structural and mechanical properties of mixed Biopolymer gels
A.
Clark
-
Biopolymer mircostructure and rheology
A-M.
Hermansson
Gels
-
Controlling Alginate Gels by Applying G-blocks
K.I.
Draget, T. F. Bore, E. Onsøyen and O. Smidsrød
-
Evaluation of mucoadhesion for two polyelectrolyte gels in simulated
physiological conditions, using a rheological method
K. Edsman, H. H
ägerströ
m
and
M.
Paulsson
-
Effects of shear history on the viscosity and gel development of oil
well cement slurries
H.
Hodne, A. B. O'Hagan, A. Saasen and S. O.
Wick
-
R
heological properties of pastes made of modified wheat flours
H. Larsson and
S.
Kjellberg
-
Modelling of the SAG test for pectin gels
H.
Nielsen,
M
Kolte, B. U. Nielsen and
S.
Hvidt
-
Effects of flow behaviour and temperature on whey protein gels, pure
and in mixture with xanthan
P.
Walkenstr
ö
m,
A-M. Hermansson and E. Windhab
General and Theoretical Rheology
Polymer
Rheology
Rheometry
Posters
Invited Papers
Food
Rheology
Instrumentation
Polymer Rheology
General and Theoretical Rheology
Cement
based Suspensions such as Mortar and Concrete
-
Parameter study on the rheological characteristics of fresh concrete,
measured with the BML - viscometer
G.L.
Pelova, J.C. Walraven and
J.A.
Den
Uijl
-
Rheological test procedure in the ready-mixed concrete batch plant
M
Helm and
F.
Hornung
-
Rheological measurements on building materials, a comprehensive research
program
M. Greim
-
Effect of thickening agents on the rheology of fresh mortar
O. Wallevik
-
The
effect of particle size distribution of filler and cement on fine mortar
rheology
P. Billberg
Drilling
Fluids and Cement Grouts
Invited Papers
Contributed Papers
-
Application of rheological models to oil and synthetic based drilling
fluids
R.
P. Jachnik and G. Robinson
-
Flow of
drilling fluids between eccentric rotating cylinders
D.
A. Siginer and S. Bakhtiyarov
-
Fluid
displacement in a tube
D.
A. Siginer
-
Barite
sag in drilling fluids
C.
Ehrhorn and A. Saasen
-
Determination of molecular weight distribution from rheological
experiments
E.
-M.
Kutschmann
-
Elastic
properties and reaction kinetics of CrIII-crosslinked polymer gel
systems
E.
Allen
-
Cox-Merz
rule revisited: High molecular weight poly-styrene solutions
S. Hvidt
-
Relationship between polymer structure and rheology
T. Borg and E. J. Pääkkönen
-
Sedimentation of particle suspensions in non-newtonian fluids
D.
V. Qouc and E. Allen
-
Control
of rheology of concentrated latices using associative thickeners
A. J.
Reuvers and J. F. M. Coopmans
-
A
general purpose rheometry measuring head
L. Bohlin
-
Rheology
of confectionery products
H. Kragh
and A. Isaksen
-
Mechanical properties and permeability of whey protein films
M.
Stading,
A. Pettersson, and A. Leufvén
-
Rheological measurements at high temperatures
A. Friis, C. Jensen, P. Muhrbeck, and J. Adler-Nissen
-
Non-linear optical polymers (NLOPs) for photonic devices
C.
Klason, R.
W. Rychwalski, A. V. Vannikov, S. I. Andersson,
and A. Ponomarenko
-
Dynamic
shear measurements of ageing rate for poly(vinyl acetate)
in the
TV-region
M.
Delin, V. Pelisek, R.
W. Rychwalski, and C. Klason
-
Simulation of Viscoelastic flow through a tube with a constriction
P.
Szabo, E.J. Hinch, J.M. Rallison, and O.G. Harlen
-
A
stability study of poly(L-lactide) in the melt
A.
S
ödergård
-
Effect of molecular weight distribution on the elasticity of melt of
biodegradable
poly(ester-urethane)
M. Härkö
nen,
K. Hiltunen, T. Rantanen, and J. Sepp
älä
-
Applicability of the IFR method for characterization of interfacial
tension
in
immiscible polymer blends
J.
Kirjava, T. Rundqvist, R. Holsti-Miettinen, M. Heino, and T. Vainio
-
Thermal and mechanical characterization of biodegradable polymer
coatings
T.
Rantanen and T. Kimpim
äki
-
Rheological measurements as a tool to review the molecular weight
tailoring of polypropylene
N.
Manner and P. J
ääskeläinen
-
Relations of rheological measurements to sagging and sedimentation
of
unsaturated polyester based gelcoats
L.
Orre, P. Nissil
ä
,
T. Svanholm, and J. Sepp
älä
-
Surface gravity waves on
Viscoelastic liquids
A.
Saasen
-
Morphology of viscous fingering in non-Newtonian fluids
E.
Allen
-
Dynamic properties of the wood cell wall
M.
Laantera, K. Soljamo, and J.J. Lindberg
-
Rheology and microstructure of mixed kappa-carrageenan-galactomannan
gels
M.
Stading and A.-M.
Hermansson
-
Simulation of the paper coating process - the importance of the inertial
forces and of some rheological properties of the coating colours
P.
Isaksson
-
Practical
rheology for polymer production and processing
N.
Gustafsson
-
Bottle
weight of degraded HDPE during blow molding
A.
Harlin
-
Pressure drop through gravel packs
J. Enevoldsen, H.K. Rasmussen, and A. Saasen
-
Rheology of crude oils containing asphaltenes and wax
A.
Saasen, S. Hvidt, D. Hinnaland, and H.P. Rönningsen
-
Micellization of a polyethylene oxide)-poly(propylene oxide)-
poly(ethylene
oxide) copolymer in aqueous solutions studied by
oscillatory bulk modulus technique
N.
Hermann, N.B. Olsen, and S. Hvidt
-
Measurement of interfacial tension of high viscosity polymer systems by
the shape evolution of an
imbedded disk
T. Rundqvist and C.
Klason
-
High
pressure vane in
cup rheometer Statoil rheometer (E3722)
T.T.
Eikaas, H.P. Rønningsen, J. Grande, J. Sanchez,
S. Strand,
and A. Saasen
-
On-line
rheometry of polymer melts: Steady shear and entry pressure measurements
A.L.
Kelly, P.O. Coates, D.J. Fleming, and T.W. Dobbie
-
Time
scales in physical ageing of poly (vinyl acetate)
M. Delin,
R. W. Rychwalski, J.M. Hutchinson, J. Kubat, and
C. Klason
Invited Lectures
Food
Rheology
Invited Lecture
Rheology of Suspensions
General Rheology
-
Phenomenological Characteristics of the Term 'Gel'
K
Almdai J. Dyre, S. Hvidt and O. Kramer
-
Rheological Studies of Micelle and Gel Formation in Aqueous
Solutions of
PEO/PPO/PEO triblock Co-Polymers
E.B.
Jørgensen, S. Hvidt and W. Brown
-
Random Polybutadiene Networks with Tunable
Loss Peak
S.
Ndoni A. Vorup and O. Kramer
-
Elasticity and Flow Properties of
Actin Gels
S.
Hvidt
-
Simulation of Transient Viscoelastic
Flow
H.K.
Rasmussen and
O. Hassager
-
Some Remarks on
the Mechanism of Electrical Noise Generation During Capillary
Flow of Polymer Solutions
C. Klason, J. Kubat and O.
Quadrat
-
Fast Determination of the
Complex
Modulus Function G.
Winther, O, Kramer and J.C. Dyre
-
A High Speed Data Aquisition
and
Processing
System for Oscillatory Experiments
G. Winther,
D.M. Parsons and
J.L. Schrag
-
A
Torsion Pendulum for
Studies
of
Soft Gels
M.R,
Hansen, B.
W. Rasmussen and S. Hvidt
-
A New Torsional Rod
Instrument
for Measurement of Dynamic Viscoelasticity
T. Nakken,
K.D. Knudsen, A. Mikkelsen and A. Elgsaeter
-
Comments on the Application
of
Stress
Controlled and Strain Controlled Rheometers
M.
Schmidt and
A. J.P. Frank
-
A
New Controlled Stress
Rheometer M. Larsson
-
Structural and Rheological Properties of Branched Polyethylene
Polymerised by means of Metallocene Catalysts B. Hagström
-
A
Torsion Pendulum for
Studies of Soft Gels
M.R,
Hansen, B.
W.
Rasmussen and S. Hvidt
-
A New
Torsional Rod Instrument for Measurement of Dynamic Viscoelasticity
T. Nakken, K.D. Knudsen, A. Mikkelsen and A. Elgsaeter
-
A New Controlled Stress Rheometer M. Larsson
-
Structural and Rheological Properties of Branched Polyethylene
Polymerised
by means
of Metallocene Catalysts B
.
Hagstr
öm
|
