Transactions

• 25 years of the Annual Transactions of the Nordic Rheology Society
  R. Kádár, M. Stading, and A. Saasen

• Chickpea protein-stabilized emulsions: from interfacial to bulk rheology
  N. C. Isaurralde, M. Felix, A. Romero, and A. Guerrero

• Development of extruded high-protein alternatives to meat
  M. Stading and M. Berta

• The effect of Prunus cerasus gum exudates addition on physic-chemical, rheological and sensory properties of yogurt
  S. Khosrowshahi and M. A. Hesarinejad

• Gels of carrageenan from different origin fall on a master curve
  H. L. Pedersen, J. Larsen, J. Andersen, and I. Hemmingsen

• How the type of exopolysaccharide affects the rheological properties of fermented products
  G. Surber, S. Mende, V. Constantinescu, D. Jaros, and H. Rohm

• Rheology of co-amorphous drug-drug melts with and without polymeric additives
  L. Arnfast, J. Aho, and J. Rantanen

• Assesment of mucoadhesion using small deformation rheology revisited
  S. Harloff-Helleberg and H. M. Nielsen

• A risk-based and patient-centric approach to pharmaceutical product development: Rheology as a critical quality attribute
  A. Sekulovic, J. Aho, R. Verrijk, T. Rades, and J. Rantanen

• Effect of cellulose-based hydrocolloids and starch chemical modification on the rheology of gluten-free dough
  M. Berta, I. Koelewijn, K. Johansson, and M. Stading

• Using creep testing as an alternative to multiwave oscillation for determining the true gel point of network polymers
  M. Larsson, J. Duffy, S. Murphy, and A. Hill

• Rheology of dopamine containing polymers
  F. J. Stadler, S. Hashmi, A. GhavamiNejad, and M. Vatankhah-Varnoosfaderani

• Fabrication and characterization of gels with optimum stiffness and syneresis from Lathyrus sativa protein isolate
  M. A. Hesarinejad, A. Koocheki, S. M. A. Razavi, and M. A. Mohammadifar

• Velocity profiles and shear-induced structuring in wormlike micellar solutions flowing in a microcapillary
  C. Caiazza, V. Preziosi, G. Tomaiuolo, D. O’Sullivan, V. Guida, and S. Guido

• Magnetic particle nanorheology in complex fluids
  M. Hermes, E. Roeben, L. Kibkalo, and A. M. Schmidt

• Extrusion melt flow instabilities in long chain branched polyethylenes
  Roland Kádár

• On shear-banding and wormlike micellar system response under complex flow
  J. E. López-Aguilar, M. F. Webster, H. R. Tamaddon-Jahromi, and O. Manero

• Viscoelastoplastic & thixotropic predictions for sharp-corner contraction-expansion circular flows with time-dependent constitutive equations
  J. E. López-Aguilar, M. F. Webster, H. R. Tamaddon-Jahromi, and O. Manero

• Dynamics of coalescent immersed jets under viscoelastic effects
  C. Patrascu, I. Omocea, and C. Balan

• Displacing difficult yield stress fluids from pipes
  I. A. Frigaard, J. Jeon, G. Moises, M. F. Naccache, and K. Alba

• Simulation of adhesive using a novel viscoelastic stress method
  S. Ingelsten, A. Mark, F. Edelvik, and P.J. Wahlborg

• Numerical simulations of buoyancy-driven droplets in non-Newtonian media using a variance-reduced, micro-macro, particle-level set method
  J. L. Prieto

• A new constitutive model for time-dependent fluids
  T. G. M. Santos and C. O. R. Negrao

• New approach for modeling polymer modified bitumens as polymer solutions: power-law scaling of rheological constants
  O.-V. Laukkanen, H. H. Winter, H. Soenen, and J. Seppälä

• Modulus increase and crystallization evolution during gel spinning and post drawing of UHMWPE fibers
  C. Henry, G. R. Palmese, and N. J. Alvarez

• Hyphenation of Rheology and Raman Spectroscopy - Investigation of epoxy curing mechanism and polyethylene crystallization
  M. Kempf, B. Dippel, and O. Arnolds

• Peristaltic mixing of Bingham fluids in a closed cavity: a numerical study
  Z. Poursharifi and K. Sadeghy

• Effect of channel confinement on the steady flow of Bingham plastic fluids across a confined square cylinder
  P. Mishra and R. P. Chhabra

• Numerical simulation of planar extrusion and fused filament fabrication of non-Newtonian fluids
  R. Comminal, J. H. Hattel, and J. Spangenberg

• Influence of polymer solution properties on the characteristics of electrospun fibers
  X. Liu, J. Aho, S. G. Baldursdottir, H. Qu, L. Porskjær Christensen, J. Rantanen, and M. Yang

• Filled rubbers manifesting superposed nonlinear viscoelasticity
  L. Wang, W. Xiong, and X. Wang

• Large amplitude oscillatory shear and sensory profiling of Peanut butter and Tahin
  M. B. Larsen and P. I. Hedelund

• Viscosity of a selection of edible oils and blends of oils at different temperatures
  E.-O. Rukke and R. Barfod Schüller

• Novel method for on-line rheology measurement in manufacturing of non-Newtonian liquids
  F. Okkels, A. L. Østergård, and M. A. Mohammadifar

• Mechanical properties of 67NR tumours are broadly independent of the immune status of the host mouse
  C. T. Nordgård, S. v. Rao, M. J. Dille, T. S. Steigedal, and K. I. Draget

• The rheology of food hydrogels based on the marine polysaccharide/gelatin polyelectrolyte complexes
  S. Derkach, N. Voron’ko, L. Kuranova, and N. Sokolan

• Rheological approach to the development of a reference fluid mimicking crude oil behavior
  G. Rodionova, J. Sjöblom, and S. Derkach

• Developing cultured meat scaffolds of extruded vegetable-based proteins
  A. Krona, F. P. Klose, J. Gold, R. Kádár, and M. Stading

• Development of bio-based superabsorbent polymeric matrices based on functionalized soy protein
  A. A. Cuadri, C. Bengoechea, A. Romero, and A. Guerrero

• Estimation of nominal viscosity of Newtonian liquids from data obtained by an oscillation- type density meter
  A. Furtado, R. Pagel, F. Lorenz, I. Godinho, and H. Wolf

• Development of RheoSpec viscometer based on EMS method
  S. Mitani, M. Hirano, T. Hirano, and K. Sakai

• New insights into the use of a rotational rheometer as tribometer
  J. Läuger and K. Pondicherry

• Use of rheological models for the evaluation of cement pastes with air-entraining agent in different temperatures
  R. C. de O. Romano and R. G. Pileggi

• Enhancement of Drilling Fluid Rheology by Nanoparticles
  M. Alyasiri, J. Antony, and D. Wen

• Insight into non-linear Rheology of highly filled non-Brownian Suspensions
  F. Nettesheim, B. Bennett, W. Hyde, J. Howe, M. Pottiger, N. Young, and H. Kragh

• Effect of shear and extensional viscosities on wet-spinning of cellulose nanofibril hydrogels
  M. Lundahl, V. Klar, M. Ago, G. Cunha, and O. Rojas

• Rheology of CO2-CH4 hydrates measured in a concentric pressure cell
  J. Gauteplass, A. Torsvik, and T. Barth

• Effects of Preconditioning and Ageing on Rheological Properties of Model-Drilling Fluids
  B. Werner, B. Lund, B. R. Kosberg, E. Johansen, G. L. Giil, and J. D. Ytrehus

• The Application of Process Tomography for the In-line Measurement of Rheology
  T. D. Machin, M. J. H. Simmons, R. W. Greenwood, and K. Wei

• The Effect of a Magnetic Field on the Rheological Properties of Iron - Aerosil - Glycerol Suspensions
  S. A. Vshivkov, A. G. Galyas, and A. Yu. Oznobikhin

• Experimental study of filament break-off of dense suspensions
  F. Carson and G. Mårtensson

• Impact of particle packing in the rheological properties of cementitious pastes additived with polycarboxylate
  R. C. de O. Romano, M. S. Rebmann, H. M. Bernardo, J. Raucci, C. Massucato, and R. G. Pileggi

• Application of the Least Square Finite Element Method in the Evaluation of the Rheo- logical Behaviour of the Dilute Polymeric Emulsion in Simple Shear Flow
  M. Mostafaiyan, G. Heinrich, and S. Wießner

• Pressure drop in microfluidic reactor
  V. Penkavova, M. Bendova, P. Stavarek, S. Hejda, H. Vychodilova, D. Vlcek, and P. Kluson

• Experimental evaluation of compaction load and duration effects on flowability of ther- moplastic rubber (TPR) granular systems
  S. Coppola, M. F. Pirini, and F. S. Grasso

• Cross-WLF parameters to predict rheological properties of polylactic acid
  D. Ferri, A. Perolo, and M. Nodari

• Characterization of summer tire tread compounds by Large Amplitude Oscillating Shear (LAOS)
  M. Heinz, J. Kroll, and T. Rauschmann

• Natural convection in Bingham plastic fluids from two heated horizontal cylinders in a square duct
  L. Mishra and R. P. Chhabra

• Power Law Behavior in Granular Matter Rheometry
  Thomas Petersen, Maria B. Larsen, Mia F. Falkeborg, Eleonora M. Becker, and Anne L. Nielsen

• Dry granular flows: rheological measurements of the μ(I)-rheology
  A. Fall, M. Badetti, G. Ovarlez, F. Chevoir, and J.-N. Roux

• How tribo-electric charges modify powder flowability
  A. Rescaglio, J. Schockmel, F. Francqui, N. Vandewalle, and G. Lumay

• Rheological properties of concrete: scale up from mortar paste to concrete mix with different PCI admixtures
  F. Curto, S. Carrà, P. Danilo, and M. Al-Manasir

• Can we work out Janssen equation parameters and stress dependence of the bulk density at low stress values during a simple uniaxial compression test?
  D. Ferri

• Influence of modified nano silica particles on compatibility of linear low-density polyethylene/poly (lactic acid) blends
  M. Hoseini and A. Haghtalab

• From simple to complex glass-forming liquids: broadening of the glass transition as studied by shear rheology
  O.-V. Laukkanen, H. H. Winter, H. Soenen, and J. Seppälä

• Non-linear viscoelastic behaviour of a suspension of magnetized solid particles under large amplitude oscillatory shear test: a direct numerical simulation
  M. R. Hashemi, M. T. Manzari, and R. Fatehi

• Relations between colloidal structures in aqueous suspensions based on silica, starch and PEO-PPO-PEO block copolymer and structures of the corresponding composites
  L. Järnström, Y. Petkova-Olsson, and H. Ullsten

• Effect of bimodal size distribution of dense colloidal silica suspensions in PEG on reversible shear thickening
  Z. Daneshfar, F. Goharpey, H. Nazokdast, and R. Foudazi