Transactions

• Heat transfer in laminar flow of viscoelastic fluids in straight tubes of arbitrary shape
  D. A. Siginer

• Contraction flow for characterization of extensional rheological properties
  M. Stading, C. Roëtynck and L. Bohlin

• Rheology in soil mechanics – structural changes in soils depending on salt and water content
  W. Markgraf and R. Horn

• Dunes dynamics and turbulence structures over particles bed: Experimental studies and CFD simulations
  H. A. Rabenjafimanantsoa, R. W. Time, M. Hana and A. Saasen

• Interaction of non-Newtonian fluid dynamics and turbulence on the behavior of pulp suspension flows
  J.-P. Huhtanen and R. Karvinen

• Rheological indicators of LDPE to predict processing performance in extrusion coating
  C. Oveby

• Rheology of cementitious suspensions containing weighting agents
  H. Hodne, A. Saasen and E. Pita

• In-line ultrasound based rheology of concentrated suspensions
  J. Wiklund and M. Stading

• Disruptive shear stress measurements of fibre suspension using ultrasound Doppler techniques
  P. Raiskinmäki and M. Kataja

• Ultrasonic spectroscopy – a rheological tool
  H. Kragh

• Electroacoustic technique for fast monitoring of colloidal dispersion: Zeta potential titration of alumina with anionic polyelectrolyte
  H. Sarraf, J. Havrda and R. Herbig

• A new tool for measuring elongational viscosity
  P. Hodder and A. Franck

• A new device for controlling the true gap size in real time during rheological testing
  J. Läuger, P. Heyer and G. Raffer

• A magnetic bearing rheometer with unprecented low-torque performance
  B. A. Costello, N. R. Doe, P. W. Foster and R. E. Smith

• Fourier transform rheometry: a new tool to investigate intrinsically non-linear viscoelastic materials
  J. L. Leblanc

• Rheology: from process to simulation
  B. Debbaut

• Rheological aspects of foaming processing
  S. Iannace

• Effects of Processing Conditions on Exfoliation and Rheological Behaviour of PBTClay Nanocomposites
  L. Scatteia, P. Scarfato and D. Acierno

• The Influence of Nanoparticles on Rheological Properties of Polypropylene
  P. Fabrin, P. Peltola, E. Välipakka and K. Hanhi

• On relationship between PVT and rheological measurements of polymer melts
  T. Sedlacek, P. Filip and P. Saha

• Novel aspects of the rheology of syndiotactic polypropylene: Pressure dependence of viscosity,
  E. Rojo, C. Echeverria, M. Fernandez, M. E. Munoz and A. Santamaria

• Evaluation of pressure dependence of viscosity for some polymers using capillary rheometer
  J. Aho and S. Syrjälä

• Use of rheology to determine the molecular weight distribution of polymers
  B. A. Costello

• Shear degradation and possible viscoelastic properties of high molecular weight oil drag reducer polymers
  A. A. Hamouda, C. Eliassen, C. Isdøe and T. Jacobsen

• Rheology of non-colloidal liquid-particle suspensions
  J. Hyväluoma, T. Kemppinen, P. Raiskinmäki, A Koponen, M. Kataja, J. Timonen, M.Toivakka

• The influence of shear thinning behavior on lubricating grease consistency and its effect on oil separation
  K. Siik and J. Vuorinen

• Rheological characterization of fiber suspensions prepared from vegetable pump and dried fibers. A comparative study
  E. Bayod, U. Bolmstedt, F. Innings and E. Tornberg

• Rheological properties of cooked oat bran
  F. K. Gates, H. Anttila, T. Sontag-Strohm and H. Salovaara

• Permeable plate rheometry for evaluation of reaction kinetics of gels
  S. Edrud and M. Stading

• Characteristics of out-of-plane rheological behaviour of paper
  T. Ponkkala, V. Kunnari and E. Retulainen,

• Reological properties of gels formed with furcellaran and globular proteins bovine serum albumin and beta -lactoglobulin
  K. Laos, G. J. Brownsey, M. Friedenthal and S. G. Ring

• Rheology of strongly sedimenting magnetite suspensions
  J. Gustafsson, M. Toivakka, and K. K. Koskinen

• Pressure-dependent viscosity of PIM compounds
  T. Sedlacek, B. Hausnerova and P. Saha

• The Influence of thickeners on the surface structure of coatings, a relationship between surface structure, colloidal stability and viscosity
  A. Wallström and L. Järnström

• Physical properties as a tool for quality assessment in fruit processing
  T. Lõugas, M. Liis, K. Laos and R. Vokk

• Relationships between surface chemistry and rheology in highly concentrated suspensions of nano-ceramic composites
  H. Sarraf, J. Havrda, and R. Herbig

• In situ tensile deformation of plasticized zein films
  M. Naushad Emmambux and M. Stading

• Viscosity of cement slurries as a function of solids content
  H. Justnes and H. Vikan

• Rheological hydrate detection and characterization
  R. B. Schüller, M. Tande and H. K. Kvandal

• A method to characterise the propensity for dynamic sagging of weight materials in drilling fluids
  B. Aas, A. Merlo, R. Rommetveit and N. Sterri

• Flow regimes over particles bed: Experimental studies for particles transport in horizontal and inclined annuli (incl. erratum)
  H.A Rabenjafimanantsoa, R.W. Time and A. Saasen

• The influence of particle type and size distribution on viscosity in a non-Newtonian drilling fluid
  T. H. Omland, B. Dahl, A. Saasen, K. Svanes and P. A. Amundsen

• Rheology characterization of polymer drilling roams using a novel apparatus
  Z. Chen, R.M. Ahmed, S.Z. Miska, N.E. Takach, M. Yu, M.B. Pickell and A. Saasen

• Drilling fluid tixotropy and relevance
  R. Jachnik

• Adsorption of plasticizers - Influence of plasticizer and cement type
  H. Vikan, H. Justnes and R. Figi