Transactions

• Extensional rheology of cereal protein systems
  M. Stading, A. Oom, A. Pettersson and S. Edrud

• Rheological challenges in automotive production
  M. Schmidt and G. Strannhage

• Determination of the entrance pressure drop in capillary rheometry using Bagley correction and zero-length capillary
  J. Aho and S. Syrjälä

• Simultaneous use of PIV and UVP to measure velocity profiles and turbulence in jet flow
  A. H. Rabenjafimanantsoa, R. W. Time and A. Saasen

• Characterization and rheological properties of waxy oils
  S. Chen, G. Øye and J. Sjöblom

• High pressure hydrate detection in a stirred vessel
  R. B. Schüller, J. Funner, V. Mathiesen, I. Gjermundsen and H. K. Kvandal

• Back extrusion of Vočadlo (Robertson-Stiff) fluids - semi-analytical solution
  P. Filip, J. David and R. Pivokonsky

• Rubber technology: Past, present, future
  M. Bellander, L. Kari, S. Persson and B. Stenberg

• An Approach to assess the rheological behavior relevant to the intumescence process of polyolefin-chalck-silicone elastomer formulations
  R. Krämer and U. W. Gedde

• Quantifying tailing in liquid confectonery fillings using texture analysis and etensional viscosity
  N. W. G. Young

• Rheo small angle light scattering (Rheo-SALS) and rheo-microscopy as tools for investigations of structure- property relations in complex fluids
  J. Läuger and P. Heyer

• A calibration method for a nwe type of rheometer
  C. Salas-Bringas, W. K. Jeksrud, O.-I . Lekang and R. B. Schüller

• Measurements on selected (semi)-solids in a wide temperature range using new solid clamps
  K. Oldörp, C. Küchenmeister, J. Nijman

• Rheomembrances
  B. Steenberg

• Interactions between fibers and colloidal particles subjected to flow
  T. G. M. van de Ven

• Measurements, mechanisms and models: Some important insights into the mechanisms of flow of fibre suspensions
  G. G. Duffy

• Rheology of polymer nanocomposites - are there unique effects for exploitation
  L. A. Berglund

• Rheological aspects of biomedical materials
  A.-C Albertsson

• Use of the Du Noüy ring with a rotational rheometer to measure interfacial rheological properties
  B. Costella, P. Hodder and A. Franck

• Linear and non-linear rheology of a model wormlke micellar solution
  S. Edrud, C. J. Pipe and G. McKinley

• Swelling properties of spray-dried powders made of starch and poly(vinyl alcohol)
  A. Jansson and L. Järnström

• Rheologycal behavior of CNT-reinforced damping materials
  M. V. Kireitseu, L. V. Bochkareva and D. Hui

• Fatigue characterization of asphalt concrete ursing Schapery´s work potential model
  R. Lundström and J. Ekblad

• Viscosity of enzymatically-exracted potato fibres in fruit juices
  S.L. Mason, L. Degutyté-Fomins and A.S. Meyer

• Rheological properties of African prolamin systems
  A. Oom, S. Edrud, A. Pettersson, J. Taylor and M. Stading

• Rheological characterization of two petroleum waxes
  M. Petersson, I. Gustafson and M. Stading

• Rheological behavior of polypropylene/organoclay composites
  N. Ristolainen, T. Saarinen and J. Seppälä

• Fibre flow research history: Part I. Background and beginning
  U. Björkman

• Characterization of non-Newtonian fluid models for wood fiber suspensions in laminar and turbulent flows
  J.-P. T. Huhtanen and R. J. Karvinen

• On fibre flocculation in turbulent pulp flow
  M. S. Nigam

• The metarheology of crowded fibre suspensions
  U. Björkman

• Visualization of the flow of a papermaking suspension in an axisymmetric sudden expansion using emission tomography
  S. Heath, K. Buckley, M. Martinez, S. Lapi, J. Olson and T. Ruth

• The wall effect on the orientation of fibres in a shear flow
  A. Carlsson, F. Lundell and D. Söderberg

• Out-of-plane rheological behaviour of paper: the effect of furnish composition, basis weight and drying shrinkage
  T. Ponkkala, V. Kunnari and E. Retulainen

• The influence of entrapped air on rheological properties of cement suspensions in early state of hydration
  H. Hodne, V. Falkeid and A. Saasen

• Preliminary results on rheological and damping properties of nanoparticle-reinforced materials
  M. V. Kireitseu

• A device to measure flow behaviour of settling particle slurries
  N. Tommukayakul, J. F. Morris, R. G. Morgan and R. L. Morgan

• Rheological properties of carbomer dispersions
  K. Al-Malah