Transactions

• Establishing an experimental preconditioning procedure for rheological characterization of oil-Based drilling fluids
  D. Assembayev, V. Myrseth, B. Werner, K. R. Gyland, A. Saasen, Z. Ibragimova, J. D. Ytrehus

• Using DLS-Microrheology and Raman Spectroscopy to probe self-assembly and gelation mechanisms in complex fluids
  M. Larsson, S. Amin, S. Blake, E. N. Lewis, L. Kidder and S. Kenyon

• Relative humidity as a new parameter in rheological testing
  J. Läuger and G. Arnold

• Rheological characterization of styrene-butadiene-styrene block copolymer modified bi- tumens
  O.-V. Laukkanen, H. H. Winter, H. Soenen, and J. Seppa ̈la ̈

• Characterization and modelling of phase separation in polymer modified bitumen
  J. Zhu, R. Balieu, X. Lu, and N. Kringos

• Complex viscoelastic fluid properties of a tiny worm
  M. Backholm, W. S. Ryu, and K. Dalnoki-Veress

• Rheological modification of fluid foods for patients with dysphagia
  W. M. Qazi and M. Stading

• Impact of silver nanoparticles on the mechanical properties of aquabacterium biofilms
  Y. Schmitt, A. Grün, N. Jonas, D. Demeshko, W. Manz, and S. Rathgeber

• Interfacial assembly of class II hydrophobin HFBI
  A. Paananen, M. Lienemann, and M. Linder

• Potential of thromboelastometry and multispeckle diffusing wave spectroscopy for monitoring acid-induced casein gelation
  N. Raak, R. Leidner, H. Rohm, and D. Jaros

• Modelling of acid coagulation data analysed by Formagraph and estimation of milk coagulation parameters
  I. A. Ketto, S. B. Skeie, and R. B. Schüller

• The effect of nanoparticles on airway mucus functional properties, a case study
  C. Taylor Nordgård and K. I. Draget

• Drug-loaded poly(e-caprolactone) for 3D printing of personalized medicine: a rheological study
  J. Aho, N. Genina, M. Edinger, J.P. Botker, S. Baldursdottir, and J. Rantanen

• Direct conversion of creep data to dynamic moduli
  M. K. Kwon, S. H. Lee, S. G. Lee, and K. S. Cho

• Effect of Molecular Weight, Polydispersity and Monomer of Linear Homopolymer Melts on the Intrinsic Mechanical Nonlinearity 3Q0(ω) in MAOS
  M. A. Cziep, M. Abbasi, and M. Wilhelm

• The Effect of Polycaprolactone Grafting on Temperature Dependent Difference during Polymer Melt Extrusion Flows Rheological Properties of Multiarm Star copolymers
  L. Slemenik Perše and M. Huskić

• Rheological analysis of bitumen as a complex glass-forming liquid and comparison with some simple glass-forming liquids
  O.-V. Laukkanen, H. H. Winter, H. Soenen and J. Seppälä

• Influence of processing conditions on the linear and nonlinear oscillatory shear, extensional and combined dielectric-rheological properties of poly(ethylene-butyl acrylate) - graphite nanoplatelets - carbon black hybrid nanocomposites
  R. Kádár, M. Abbasi, R. Figuli, R. Ariño, M. Rigdahl and M. Wilhelm

• Rheology and Small Angle Neutron Scattering of model polymer systems
  L. Hengeller, Q. Huang, A. Dorokhin, N. J. Alvarez, J. Judas, K. Kirkensgaard, O. Hassager, K. Mortensen and K. Almdal

• Analytical Solutions of the Giesekus and the Phan-Thien and Tanner Models for LAOS
  J.-E. Bae and K. S. Cho

• Phenomenological Model for Linear Viscoelasticity of Monodisperse Polymer
  S. Kim, J-E. Bae and K. S. Cho

• Low-Field RheoNMR: Newly Developed Combination of Rheology and 1H TD-NMR to Correlate Mechanical Properties with Molecular Dynamics in Soft Matter
  M. B. Özen, V. Räntzsch, K.-F. Ratzsch, G. Guthausen, M. Wilhelm

• Nanorheology of thin polymer films
  M. Backholm, M. Benzaquen, T. Salez, E. Raphaël and K. Dalnoki-Veress

• Rheology-Raman Spectroscopy: Tracking Polymer Crystallization with the Combination of a Rheometer and a Raman-Microscope
  J. P. Plog, M. Meyer, A. Kotula and K. Migler

• Feed compositional effects on rheological and microstructural characteristics of high pro- tein vegetable extrudates
  Y. L. N. Thadavathi, S. Wasse ́n, and R. Ka ́da ́r

• Rheology of complex fluid-fluid interfaces
  J. Vermant, M. Pepicelli, J. Samaniuk, M. Nagel, P. Beltramo, and T. Tervoort

• Miraculous gelation - unresolved problems and open questions of gelation rheology
  H. H. Winter

• Numerical investigation of a two-fluid model for shear-banding polymer solutions
  S. Hooshyar and N. Germann

• Numerical simulation of 3-D film blowing process under thermal and crystallinity effects
  H. Mercan, P. D. Anderson, and G. W. M. Peters

• Rapid discrimination of endo- and exo-cellulases
  K. J. Pedersen, H. A. Elsalhi, R. Khoury, C. S. Vesterager, and S. Hvidt

• Structural, micro and macro-rheological properties of ternary Silica-Pluronic F127-Starch system
  Y. Petkova-Olsson, C. Oelschlaeger, H. Ullsten, and L. Järnström

• Experimental investigation of effect of salts on rheological properties of non-Newtonian fluids
  M. Khatibi, N. Potokin, R. W. Time

• Rheological properties of aquaeous nano-cellulosic dispersions
  T. Moberg, K. Sahlin, K. Yao, S. Geng, G. Westman, A. Zhou, K. Oksman, and M. Rigdahl

• Strength and water interactions of cellulose I filaments wet-spun from cellulose nanofibril hydrogels
  M. J. Lundahl, A. G. Cunha, E. Rojo, A. C. Papageorgiou, L. Rautkari, J. C. Arboleda, and O. J. Rojas

• Effect of E-beam treatment of ligno-cellulosics on the rheological properties of the ionic liquid solutions
  Y. Ma, M. Hummel and H. Sixta

• Rheological characterization of anticorrosion coatings based on 1,2- bis(trimethoxysilyl)ethane and trisilanol-heptaisooctyl POSS molecules
  L. S. Perše, M. Rodošek, and A. K. Surca

• Rheological studies on linear viscoelasticity of xanthan gum solutions
  C. Kim, S. H. Lee, M. Kwon and K. S. Cho

• Viscosity of a selection of aquavits at different temperatures
  E.-O. Rukke and R. B. Schüller

• Rheological characteristics of commercial tomato concentrate and corresponding ketchup
  E.-O. Rukke, A. L. Pedersen, and R. B. Schüller

• Structural and rheological properties of model nutritional beverage emulsions Stabilized by Bovine Lactoferrin: Influence of pH and Oil Type
  A. Sreedhara, G. E. Vegarud, A. Sarkar, T. G. Devold, E.-O. Rukke, D. Ekeberg, and R. B. Schüller

• Tailoring polymer nanocomposite microstructure by controlling orientation, dispersion and exfoliation of GnP in LDPE via extrusion flow
  G. Induchoodan and R. Kádár

• Enzymatically hydrolysed chitosan oligomer solutions - effects on intrinsic viscosity and molecular weight
  R. B. Schüller and B. B. Aam

• Understanding the temperature effect on the rheology of water-bentonite suspensions
  Z. Vryzas, Y. Wubulikasimu, D. I. Gerogiorgis, and V. C. Kelessidis

• Understanding the temperature effect on the rheology of water-bentonite suspensions
  Z. Vryzas, Y. Wubulikasimu, D. I. Gerogiorgis, and V. C. Kelessidis

• Rheological properties of extruded furs from blends of millet and cowpea
  K. B. Filli and I. Nkama

• The sol-gel of chondroitin-4-sulfate - based Pluronic Hydrogels as injectable biomaterials
  D. Sun and W. Richtering