Transactions

• Effects of enzymes and lignosulfonate addition on tensile strength, surface hydration properties and underwater swelling rate of microalgae pellets
  C. Salas-Bringas, A.M. Catargiu, D. Miladinovic, R. Barfod Schüller and N. Mišljenović

• Characterization of animal soft tissue for development of a new in vitro model for drug release in intramuscular injections
  J.Aho and S. Baldursdottir

• The release of Lyzosyme from tablets coated with Poly (vinyl acetate). A study on the correlation between intrinsic viscosity and protein diffusion
  J. Schjoerring-Thyssen, J.R. Christensen, C.G. Madsen and S. Baldursdottir

• Rheology of salmon skin mucus
  C. Taylor Nordgård, K. Ingar Draget and T. Seternes

• Comparison between formagraph and low amplitude oscillation rheometry in monitoring coagulation properties of acid induced gels in bovine milk
  I. Appelesy Ketto, R. Barfod Schüller, E.-O. Rukke, A. G. Johansen and S. B. Skeie

• Rheological analysis of the low-temperature dynamics of bitumens
  O.-V. Laukkanen, H. H. Winter, and H. Soenen

• Combined use of SEC/GPC, rotational, microfluidics and micro-rheology for characteri- zation of Hyaluronic acid solutions
  M. Larsson and J. Duffy

• Novel Vacuum Compression Molding as a Tool for Sample Preparation in Rotational Melt Rheology
  D. Treffer, A. Troiss, and J. Khinast

• Oscillatory and compression measurements of stimuli-responsive hydrogels
  H. Hosseini, H. Tenhu, and S. Hietala

• Macroporous alginate gels
  E. Schuster and A. Ström

• Establishing an experimental pre-conditioning procedure for rheological characterization of oil based drilling fluids
  D. Assembayev and V. Myrseth

• Drilling fluid rheology at challenging drilling conditions - an experimental study using a 1000 bar pressure cell
  A. Torsvik, V. Myrseth and H. Linga

• Pressure Sensitive Adhesives for Ostomy Care
  T. Floch, O. Hassager and B. Bingöl

• An enhanced rotational rheometer system with two motors
  J. Läuger

• Effect of shear vs. extensional flow during swallowing
  M. Stading, W. Qazi, M. Nyström, M. Berta, M. Bülow, O. Ekberg

• Multi Particle Tracking Microrheology Probing Structure and Flow of Heterogeneous Complex Fluids
  N. Willenbacher

• Multi-scale modeling and advanced simulation of concentrated fibrous suspensions
  F. Chinesta, E. Abisset-Chavannve, and R. Keunings

• Rheological requirements for continuous filament spinning of cellulose-ionic liquid so- lutions
  M. Hummel, A. Michud, S. Asaadi, Y. Ma, L. K. J. Hauru, E. Hartikainen, and H. Sixta

• Dynamics of stagnant Taylor bubbles in vertical upward pipe flow with Venturi obstruction and non-Newtonian liquids
  R. W. Time and A. H. Rabenjafimanantsoa

• Characterization of microscopic drainage and breaking mechanisms in non-Newtonian water-oil emulsions
  R. W. Time and A. H. Rabenjafimanantsoa

• Impact of jet impingement on a flat bed of particles and scour hole development mecha- nism in Newtonian and non-Newtonian fluids
  A. H. Rabenjafimanantsoa and R. W. Time

• Reconstructed nonlinear dynamics and its applications to complex fluid flows: focus on melt flow extrusion instabilities
  R. Kádár

• Spontaneous dispersion of particles on fluid-liquid interfaces
  P. Singh, N. Musunuri, and I. S. Fischer

• Electric field driven hierarchical self-assembly of monolayers of mixtures of particles
  N. Musunuri, K. Shah, M. Hossain, S. K. Gurupatham, E. Amah, I. Fischer, and P. Singh

• The effect of coherent fiber flocs on the shear strength and yield stress of cellulosic fiber suspensions
  A. Oko, A. Swerin, J. Mackenzie, and F. Lundell

• Effect of Pluronic F127 triblock copolymer adsorption on the colloidal stability and rheological performance of silica dispersions
  Y. Petkova-Olsson, H. Ullsten, and L. Järnström

• Microfibrillated Cellulose Suspensions in Slot Flow
  V. Kumar, D. Bousfield, and M. Toivakka

• Rheology to understand operational parameter: as a predictive method to avoid off specifications and maximizing the packaging process
  S. Carrà, F. Chiozza, F. Curto, M. Ferraioli

• Impact of dispersing agents on the flow behavior of montmorillonite-starch coating formulations
  E. Olsson, C. Johansson, and L. Järnström

• On the Improvement of Magnetorheological Elastomer Oxidation Stability
  M. Sedlacik, V. Pavlinek, and T. Plachy

• Edible Boger fluid and its rheology at human physiological conditions
  W. Qazi, M. Nyström, O. Ekberg, and M. Stading

• Calibration of a Jar-Tester replicated in a Rotational Rheometer
  E. Alvarenga, R. Barfod Schüller, and C. Salas-Bringas

• In-Vitro Dynamic Model of the Stomach and Small Intestine for Milk Products with Rheological Monitoring - First Prototype
  C. Salas-Bringas, S. Stenberg, M. Tysse, T. Devold, G. Vegarud, I. Comi, R. Ulleberg, E.-O Rukke, and R. Barfod Schüller

• Electrorheology of Barium Titanates - The Role of the Particle Size
  T. Plachy, L. Munster, I. Kuritka, and V. Pavlinek

• Calculation of shear rate for strand filling compounds in High Voltage XLPE Submarine Cables
  S. V. Ouren and B. Toure

• Melt Rheology of Selected Pharmaceutical Polymers for Hot Melt Extrusion
  D. Treffer, A. Troiss, and J. Khinast

• Investigation of the correlation between electrospinnability and viscosity
  X. Liu, S. Baldursdottir, H. Qu, L. P. Christensen, J. Rantanen, M. Yang

• Rheological characteristics of corn flour used during waterfowl feeding - influence of grinding and temperature
  E.-O. Rukke, L. Fortun-Lamothe, C. Pautot, and R. Barfod Schüller

• Rheology of fine- and large- particulated feed used during waterfowl overfeeding characterized by a ball measuring system
  E.-O. Rukke, L. Fortun-Lamothe, C. Pautot, and R. Barfod Schüller

• Establishing an Experimental Preconditioning Procedure for Rheological Characterization of Oil-Based Drilling Fluids
  D. Assembayev, V. Myrseth, B. Werner, K. R. Gyland, A. Saasen, Z. Ibragimova, J. D. Ytrehus